Previous
MaxMet 800 epoxy farining compound used to fill pitting corrosion

M-METAL 800 – Metal Fairing Compound – Standard Cure

£82.50£213.33 Excl VAT
Next

M-METAL 700 – Metal Epoxy Putty – Extended Cure

£337.10 Excl VAT
M-METAL 700 - Metal Epoxy Putty - Extended Cure
M-METAL 500 - Underwater Epoxy Putty Stick - Rapid Cure

M-METAL 500 - Underwater Epoxy Putty Stick - Rapid Cure

£15.70 Excl VAT

M-METAL 500 – Underwater Epoxy Putty Stick – Rapid Cure

£15.70 Excl VAT

Is a solvent-free Epoxy Putty Repair Stick, designed to cure even in damp or underwater situations.

Description

M-METAL 500 – Underwater Epoxy Putty Stick – Rapid Cure

Is a solvent-free Underwater Epoxy Putty, designed to cure in damp or underwater situations.

When mixed the material will bond to metal, wood, ceramic, fibreglass, and most plastic surfaces.

The material is supplied in stick form with a predetermined mixing ratio of base and activator. The product is mixed by kneading with a gloved hand until a uniform off-white putty is achieved. 

 

Typical Uses

  • Leak Sealing on Storage Tank Seams
  • Leak Sealing on Domestic Radiators
  • Sealing holes in GRP or Wooden Boat Hulls and Decks
  • Leak Sealing on Pipes
  • Bonding Swimming Pool tiles back in place

Application Guide

  • The material is suitable for application to manually prepared surfaces, any loose materials such as old coatings must be removed, and the surface cleaned with solvent prior to application of the product.

The product is supplied in stick form and therefore the base and activator component are pre-measured.

  • Simply break off the required amount of material from the stick and using gloved hands knead the product until the green and cream components become a consistent light green.

Use all mixed material within 15 minutes at 20°C.

  • Once a consistent mix has been achieved apply the material by pressing the putty with firm pressure onto the prepared surface and hold for 30 seconds.
  • Minimum – the applied material can be over-coated as soon as it is touch dry.
  • Maximum – the over-coating time should not exceed 6 hours.

Where the maximum over-coating time is exceeded, the material should be allowed to harden before being abraded or flash blasted to remove surface contamination.

AppearanceBase
Activator
Mixed
Green paste
White paste
White paste
Mixing RatioPre – measured
Solids Content100%
Slump ResistanceNil at20 mm
Usable Life20°C


15 minutes
Cure Times @ 20°CMovement without load or immersion:
Machining and light loading:
1 hour
2 hours
Storage LifeUnopened and stored in dry conditions (15-30°C)1 year
AdhesionTensile Shear to ASTM D1002 on abrasive blasted mild steel with 75-micron profile70kg/ cm² 1000psi
Compressive StrengthTested to ASTM D 695446kg/ cm² 6350psi
Corrosion ResistanceTested to ASTM B117Minimum 5000 hours
HardnessShore D Hardness 80 at 20°C
Heat ResistanceSuitable for long-term water immersion at temperatures up to:
Resistant to dry heat in excess of:
60°C
150°C
Chemical ResistanceThe product resists attack by a wide variety of inorganic acids, alkalis, salts and organic media.

Additional information

Weight .125 kg
Unit Size

125g

Colour

Dark Grey

Mixing Ratio

1:1 By Weight & Volume

Pot Life @ 20°C

10 Mins

Brand

Maxkote

Material

Epoxy

Reviews

There are no reviews yet.

Be the first to review “M-METAL 500 – Underwater Epoxy Putty Stick – Rapid Cure”

Your email address will not be published. Required fields are marked *

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping